Hose Fittings
Socket, Metric, Whitworth, BSP, Komatsu, ORFS, flange, test and banjo fittings.
66 products · 920 variants
What are hose fittings?
A hose fitting is the metal connector crimped onto the end of a hydraulic hose to join the line to a machine or valve. It consists of a ferrule (outer sleeve) and a nipple (inner body); the hose is compressed between the two to form the seal. Thread standard, angle and sealing face are chosen to match the equipment.
Socket R1 / R2
Crimp socket (ferrule) for 1- and 2-wire (R1/R2) hydraulic hoses.
Details & Table →
Socket R1 / R2 No-Skive
No-skive crimp socket for R1/R2 hoses.
Details & Table →
Socket 4SP - 4SH
Crimp socket for four-spiral (4SP/4SH) high-pressure hoses.
Details & Table →
Socket Six-Wire Skive (R15)
Skive crimp socket for six-wire (R15) hoses.
Details & Table →
Socket Thermoplastic (R7-R8)
Crimp socket for thermoplastic (R7/R8) hoses.
Details & Table →
Socket Teflon
Crimp socket for Teflon (PTFE) hoses.
Details & Table →
Sheet Metal Capsule
Sheet-metal capsule (ferrule) for hose ends.
Details & Table →
Kuka Socket
Kuka-type crimp socket.
Details & Table →
Metric Straight Fitting
Straight hydraulic hose-end fitting with metric thread.
Details & Table →
Metric 90° Elbow Fitting
90° elbow hydraulic hose-end fitting with metric thread.
Details & Table →
Metric 45° Elbow Fitting
45° elbow hydraulic hose-end fitting with metric thread.
Details & Table → Metric Male Fitting
Male hydraulic hose-end fitting with metric thread.
Details & Table → Whitworth UNF Straight Fitting
Straight hydraulic hose-end fitting with UNF (Whitworth) thread.
Details & Table → Whitworth UNF 90° Elbow Fitting
90° elbow hydraulic hose-end fitting with UNF (Whitworth) thread.
Details & Table →
Whitworth UNF 45° Elbow Fitting
45° elbow hydraulic hose-end fitting with UNF (Whitworth) thread.
Details & Table → Whitworth UNF Male Fitting
Male hydraulic hose-end fitting with UNF (Whitworth) thread.
Details & Table → BSP Straight Fitting
Straight hydraulic hose-end fitting with BSP thread.
Details & Table → BSP 90° Elbow Fitting
90° elbow hydraulic hose-end fitting with BSP thread.
Details & Table →
BSP 45° Elbow Fitting
45° elbow hydraulic hose-end fitting with BSP thread.
Details & Table →
BSP Male Fitting
Male hydraulic hose-end fitting with BSP thread.
Details & Table →
BSP Long Male Fitting
Long male hydraulic hose-end fitting with BSP (G) thread.
Details & Table → BSP Female Seat Straight Fitting
Straight hydraulic hose-end fitting with BSP female cone seat.
Details & Table → BSP Female Seat 90° Elbow Fitting
90° elbow hydraulic hose-end fitting with BSP female cone seat.
Details & Table → Komatsu Straight Fitting
Straight hydraulic hose-end fitting with Komatsu metric thread.
Details & Table → Komatsu 90° Elbow Fitting
90° elbow hydraulic hose-end fitting with Komatsu metric thread.
Details & Table → ORFS Hose Fitting Straight
Straight hydraulic hose-end fitting with ORFS (O-ring face seal) thread.
Details & Table → ORFS Hose Fitting 90° Elbow
90° elbow hydraulic hose-end fitting with ORFS thread.
Details & Table → ORFS Hose Fitting Long 90°
Long-body 90° elbow hydraulic hose-end fitting with ORFS thread.
Details & Table →
ORFS Hose Fitting 45° Elbow
45° elbow hydraulic hose-end fitting with ORFS thread.
Details & Table → ORFS Hose Fitting Male
Male hydraulic hose-end fitting with ORFS thread.
Details & Table →
Washing Machine Fitting
Hose-end fitting with metric thread for washing machines.
Details & Table → Grease Lubrication Fitting
Fixed female hose-end fitting for grease lubrication lines.
Details & Table → Hose Joiner (Splice)
Crimp splice joining two hose ends.
Details & Table →
Flange Straight Fitting (SAE 3000)
Straight flange hydraulic hose-end fitting (SAE 3000).
Details & Table →
Flange 90° Fitting (SAE 3000)
90° elbow flange hydraulic hose-end fitting (SAE 3000).
Details & Table →
Flange 45° Fitting (SAE 3000)
45° elbow flange hydraulic hose-end fitting (SAE 3000).
Details & Table →
Flange Straight Fitting (SAE 6000)
High-pressure SAE 6000 straight flange hose-end fitting.
Details & Table →
Flange 90° Fitting (SAE 6000)
High-pressure SAE 6000 90° elbow flange hose-end fitting.
Details & Table →
Flange 45° Fitting (SAE 6000)
High-pressure SAE 6000 45° elbow flange hose-end fitting.
Details & Table →
Flange Thick Straight Fitting (SAE 6000)
Thick-body SAE 6000 straight flange hose-end fitting.
Details & Table →
Flange Thick 90° Fitting (SAE 6000)
Thick-body SAE 6000 90° elbow flange hose-end fitting.
Details & Table →
Flange Thick 45° Fitting (SAE 6000)
Thick-body SAE 6000 45° elbow flange hose-end fitting.
Details & Table →
Flange Skive Straight Fitting (SAE 6000)
SAE 6000 skive straight flange hose-end fitting.
Details & Table →
Flange Skive 90° Fitting (SAE 6000)
SAE 6000 skive 90° elbow flange hose-end fitting.
Details & Table →
Flange Skive 45° Fitting (SAE 6000)
SAE 6000 skive 45° elbow flange hose-end fitting.
Details & Table →
Flange Thick Skive Straight Fitting (SAE 6000)
Thick-body SAE 6000 skive straight flange hose-end fitting.
Details & Table →
Flange Thick Skive 90° Fitting (SAE 6000)
Thick-body SAE 6000 skive 90° elbow flange hose-end fitting.
Details & Table →
Flange Thick Skive 45° Fitting (SAE 6000)
Thick-body SAE 6000 skive 45° elbow flange hose-end fitting.
Details & Table →
Flange Long Bent 90° Fitting
Long-bent 90° elbow flange hose-end fitting in custom center lengths.
Details & Table →
Flange Metric Straight Fitting
Metric-thread straight flange fitting with flange size and thickness options.
Details & Table →
Flange Metric 90° Fitting
Metric-thread 90° elbow flange fitting.
Details & Table →
Flange 120° Bent Fitting
120° bent flange hydraulic hose-end fitting.
Details & Table →
Flange Clamps (SAE 3000)
Two-piece flange clamp for SAE 3000 flange connections.
Details & Table →
Flange Clamps (SAE 6000)
Two-piece flange clamp for SAE 6000 flange connections.
Details & Table →
Test Fittings (DN2 - DN4)
DN2 and DN4 test fittings for pressure measurement points (tube and nut variants).
Details & Table →
Test Socket (DN2 - DN4)
Crimp socket for DN2 and DN4 test hoses.
Details & Table →
Banjo (Ring) Fitting — Crimp Type
Crimp-type banjo (ring) fitting providing orientation freedom in tight spaces.
Details & Table →
Banjo (Ring) Fitting — Sheet Socket
Sheet-socket clamp banjo (ring) fitting.
Details & Table →
Banjo (Ring) Fitting — Welded
Weld-on banjo (ring) fitting for pipes.
Details & Table →
Banjo (Ring) Bolt — Metric
Metric-thread banjo bolt for banjo (ring) fittings.
Details & Table → Banjo (Ring) Bolt
Banjo bolt for banjo (ring) fittings.
Details & Table →
Gates Fitting - Metric Straight
Metric-thread straight end fitting for Gates hydraulic hoses.
Details & Table →
Gates Fitting - Metric 90°
Metric-thread 90° elbow end fitting for Gates hydraulic hoses.
Details & Table →
Gates Fitting - BSP Straight
BSP-thread straight end fitting for Gates hydraulic hoses.
Details & Table →
Gates Fitting - BSP 90°
BSP-thread 90° elbow end fitting for Gates hydraulic hoses.
Details & Table →
Gates Fitting - R9 Sockets
Crimp sockets for Gates R9/4SP hoses.
Details & Table →What to look for
- Thread standard
- Metric (DIN 2353), BSP, Whitworth/UNF-JIC, ORFS and Komatsu threads look similar but are not interchangeable. Forcing the wrong standard strips the thread and the line separates under pressure.
- Sealing type
- The seal comes from the seating face, not the thread: 24° cone, 37° flare, flat-face O-ring (ORFS) or 60° cone. Match the face of the mating part.
- Angle
- Straight, 45° and 90° elbows exist to protect the hose bend radius. In tight spaces an elbow fitting is safer than forcing the hose to bend.
- Ferrule type
- Skive, no-skive, 4SP/4SH and thermoplastic ferrules differ. The ferrule must suit the hose reinforcement and the crimp die.
Frequently asked
How do I identify the thread standard?
Measure the outside diameter with a caliper and the pitch with a thread gauge, then compare against the tables in our Thread & Size Guide. BSP is 55°, metric and NPT are 60°; ORFS is recognised instantly by the O-ring groove in its flat face.
How is a fitting attached to a hose?
The hose is cut to length, skived if required, the ferrule and nipple are assembled and crimped with a hydraulic press to the diameter given in the catalogue. Crimp diameter is critical — under-crimping leaks, over-crimping cuts the reinforcement wire.
Can I mix hose and fittings from different brands?
Not recommended. Crimp diameters and ferrule geometry vary by brand, and mixing voids the manufacturer’s pressure warranty.